astr wrote:Since the fabrication of MOSFET, the minimum channel length has been shrinking continuously. The motivation behind this decrease has been an increasing interest in high-speed devices and in very large-scale integrated circuits. The sustained scaling of conventional bulk device requires innovations to circumvent the barriers of fundamental physics constraining the conventional MOSFET device structure. The limits most often cited are control of the density and location of dopants providing high I on /I off ratio and finite sub threshold slope and quantum-mechanical tunneling of carriers through thin gate from drain to source and from drain to body.GTFO spambot, super conductor CPUs FTW.
The channel depletion width must scale with the channel length to contain the off-state leakage I off. This leads to high doping concentration, which degrade the carrier mobility and causes junction edge leakage due to tunneling. Furthermore, the dopant profile control, in terms of depth and steepness, becomes much more difficult. The gate oxide thickness tox must also scale with the channel length to maintain gate control, proper threshold voltage VT and performance. The thinning of the gate dielectric results in gate tunneling leakage, degrading the circuit performance, power and noise margin.
SAP Consulting
FinFET Technology
LeCom wrote:This is Great news, we just need to make an article at aceofspades.com.astr wrote:Since the fabrication of MOSFET, the minimum channel length has been shrinking continuously. The motivation behind this decrease has been an increasing interest in high-speed devices and in very large-scale integrated circuits. The sustained scaling of conventional bulk device requires innovations to circumvent the barriers of fundamental physics constraining the conventional MOSFET device structure. The limits most often cited are control of the density and location of dopants providing high I on /I off ratio and finite sub threshold slope and quantum-mechanical tunneling of carriers through thin gate from drain to source and from drain to body.GTFO spambot, super conductor CPUs FTW.
The channel depletion width must scale with the channel length to contain the off-state leakage I off. This leads to high doping concentration, which degrade the carrier mobility and causes junction edge leakage due to tunneling. Furthermore, the dopant profile control, in terms of depth and steepness, becomes much more difficult. The gate oxide thickness tox must also scale with the channel length to maintain gate control, proper threshold voltage VT and performance. The thinning of the gate dielectric results in gate tunneling leakage, degrading the circuit performance, power and noise margin.
SAP Consulting
____________________________________________________________________________________________________________________
Vezok wrote:Yes but Lincent is more active on the 1.0 forums, so BnS have that appeal.
longbyte1 wrote:They're all waiting on me to finish my WebGL client.
The truth is that I haven't worked on it for the past 2 months.
Who is online
Users browsing this forum: No registered users and 14 guests